AMX MAX-CSD10, MAX-CSE manual Encoder Profiles and Parameters

MAX-CSE Web Interface

If a stream is currently in effect while these parameters are altered, clicking the Apply button will cause the outgoing stream to stop and then incorporate the new settings without restarting.

Encoder Profiles and Parameters

Profiles:	Stream Quality:	Video Defaults:	Audio Defaults:	Protocol
Home Theater	Maximum	• Codec: MPEG-2	• Codec: MP2	• UDP
		• Video In Rate: 6Mbps	• Sampling Rate: 48 KHz
		• Resolution: D1	• Effective Rate: 192 Kbps
		• Mode (encoding): CBR
High Quality	High	• Codec: MPEG-2	• Codec: MP2	• UDP
		• Video In Rate: 4Mbps	• Sampling Rate: 48 KHz
		• Resolution: D1	• Effective Rate: 192 Kbps
		• Mode (encoding): CBR
Good Quality	Medium	• Codec: MPEG-4	• Codec: MP2	• RTP
		• Video In Rate: 3Mbps	• Sampling Rate: 48 KHz
		• Resolution: D1	• Effective Rate: 192 Kbps
		• Mode (encoding): CBR
Standard Quality	Low	• Codec: MPEG-4	• Codec: MP2	• RTP
		• Video In Rate: 2Mbps	• Sampling Rate: 48 KHz
		• Resolution: D1	• Effective Rate: 192 Kbps
		• Mode (encoding): CBR
VCR	Lower	• Codec: MPEG-4	• Codec: MP3	• RTP
		• Video In Rate: 1Mbps	• Sampling Rate: 32 KHz
		• Resolution: SIF	• Effective Rate: 96 Kbps
		• Mode (encoding): VBR
Security Camera	Min	• Codec: MPEG-4	• Codec: MP3	• RTP
		• Video In Rate: 500 Kbps	• Sampling Rate: 32 KHz
		• Resolution: SIF	• Effective Rate: 96 Kbps
		• Mode (encoding): VBR
Custom	User Dependant	• User Selectable:	• User Selectable	• UDP/RTP
		UDP = MPEG-2 only
		RTP = MPEG-2/4

When a lower quality Encoder Profile is used (Good Quality or lower), the Stream parameters default to using RTP as a Transport Protocol.

To set the aspect ratio to 16:9, you must set the profile to Custom and the Video to MPEG-2. The aspect ratio is not accepted when you select any other profile.

MAX-CSE/MAX-CSD10 Operation/Reference Guide 31