Anaheim CLCI2000 user manual CLCI2004, Ordering Information, DPI65201, DPI65202, AA37MFC-6

1Ribbon cable with DB37 Connector and bracket

1CLCI2000 SERIES DISK

2#6 x 1/4 screws

1 Users Manual for CLCI2000 Series 1 to 4 Axis Computer Indexers

CLCI2004

1 CLCI2001 Computer Indexer

1Ribbon cable with DB37 Connector and bracket

1CLCI2000 SERIES DISK

2#6 x 1/4 screws

1 Users Manual for CLCI2000 Series 1 to 4 Axis Computer Indexers

ORDERING INFORMATION

1-AXIS Indexer Board	CLCI2001
2-AXES Indexer Board	CLCI2002
3-AXES Indexer Board	CLCI2003
4-AXES Indexer Board	CLCI2004
1-AXIS Driver Pack	DPI65201
2-AXIS Driver Pack	DPI65202
DB37,MF Cable, 6 feet	AA37MFC-6
DB37,MF Cable, 10 feet	AA37MFC-10
DB37,MM Cable, 6 feet	AA37MMC-6
DB37,MM Cable, 10 feet	AA37MMC-10
Terminal Breakout Board	AA2M37
ORDERING INFORMATION

CLCI2001

This is the part number for a 1-Axis Computer Indexer Board.

CLCI2002

This is the part number for a 2-Axis Computer Indexer Board.

CLCI2003

This is the part number for a 3-Axis Computer Indexer Board.

CLCI2004

This is the part number for a 4-Axis Computer Indexer Board.

DPI65201

This is the part number for a Single Axis Driver Pack that is configured to interface with a CLCI2001. The Driver Pack contains Anaheim Automation's 1.0 to 7.0 Amp driver (AA2300B), 300 watt power supply, breakout terminal board, and interface connector. To connect from the CLCI2001 to the Driver Pack, a 37 pin cable is needed (AA37MMC-6 or AA37MMC-10). The breakout terminal board provides all the connections to the Limit Switches and I/O from the DB37 connector. The Clock and Direction signals are internally connected to the driver.

DPI65202

This is the part number for a Dual Axis Driver Pack that is configured to interface with a CLCI2002. The Driver Pack contains Anaheim Automation's 1.0 to 7.0 Amp drivers (AA2300Bs), 300 watt power supply, breakout terminal board, and interface connector. To connect from the CLCI2002 to the Driver Pack, a 37 pin cable is needed (AA37MMC-6 or AA37MMC-10). The breakout terminal board provides all the connections to the Limit Switches and I/O from the DB37 connector. The Clock and Direction signals are internally connected to the driver.

AA37MFC-6

This is a DB37 Cable with a male connector on one end and a female connector on the other. The cable is 6 feet long. This cable should be used with the CLCI2000 Series Indexer and the AA2M37 Terminal Breakout Board.

2