Anritsu 373XXA manual Gpib Device Dependent Error Descriptions

SERVICE LOG ERROR MESSAGES APPENDIX B

Table B-3.GPIB-Related Error Messages (7 of 8)

Error Message	Description
Response after Indefinite Re-	This error is generated when the 373XXA’s output queue has already received an Ar-
sponse discarded	bitrary ASCII response data element and an attempt is made to place another re-
	sponse data element of any kind into the queue. The new response data element is
	discarded.
Interrupted - Response data dis-	This error is detected when the output queue contains unread response data and the
carded	controller sends a new program message. The response data is discarded.
Unterminated - Partial PM will be	This error is detected when the 373XXA’s input queue is currently receiving a program
executed	message but has not yet received the end message, and the controller attempts to
	read response data from the 373XXA. The partial program message in the input
	queue is executed as if it were properly terminated.
Deadlock - Response data dis-	This error is detected when both of the 373XXA’s input and output queues are full and
carded	the controller attempts to send another data byte. In order to prevent bus deadlock,
	the contents of the output queue are discarded.

	7205 GPIB DEVICE DEPENDENT ERROR DESCRIPTIONS
Q_SEND failure in [a procedure	An unsuccessful attempt was made to send a message to a task.
name]
	The procedure name is the place in the software where the error was detected.
Q_RECEIVE failure in [a proce-	A failure was detected while waiting for the reception of a message from a task.
dure name]
	The procedure name is the place in the software where the error was detected.
Unable to allocate memory in [a	An attempt was made to allocate some temporary memory in order to accomplish a
procedure name]	task directed in the program message.
	The procedure name is the place in the software where the error was detected.
Unable to release memory in [a	An attempt was made to return some temporary memory within a task and the return
procedure name]	failed for some reason.
	The procedure name is the place in the software where the error was detected.
Unable to get service/error log	An unsuccessful attempt was made to get a copy of the service or error log.
Unable to get calibration term	An unsuccessful attempt was made to get a calibration term.
Unable to get raw or corrected	An unsuccessful attempt was made to get raw or corrected data.
data

Unable to get final data

An unsuccessful attempt was made to get final data.

Unable to get setup or data

An unsuccessful attempt was made to get the frequency list from the database.

Unable to get setup

An unsuccessful attempt was made to get a front panel setup.

B-14 373XXA MM