SERVICE SUPPORT | GENERAL INFORMATION |
Verification Kits The ANRITSU Verification Kits listed below are used in conjunction with the 37XXX Performance Verification Software (above). See Chapter 4, Per- formance Verification, for further information.
N Verification Kit (Model 3663)
Contains precision N Connector components with characteristics that are traceable to the NIST.
Use for Models 37317A and below with Option 7N and 7 NF.
3.5 mm Verification Kit (Model 3666)
Contains precision 3.5 mm Connector components with characteristics that are traceable to the NIST.
Use for Models 37347A and below with Option 7A.
GPC-7 Verification Kit (Model 3667)
Contains precision
Use for Models 37317A and below with Option 7A.
K Verification Kit (Model 3668)
Contains precision K Connector components that are traceable to the
NIST.
V Verification Kit (Model 3669B)
Contains precision V Connector components that are traceable to the
NIST.
Test Fixtures/ Aids The test fixtures and test aids listed below are available through your lo- cal ANRITSU Sales or Service Center:
Rear Panel Printer Port Test Fixture (B39553).
This test fixture is used to check out digital printer interface circuits on the rear panel assembly.
GPIB Cable (2100-2).
This cable is used to check out digital GPIB interface circuits on the rear panel assembly.
Failed Assembly The exchange program allows a customer to quickly exchange a failed Exchange Program subassembly for a factory refurbished, fully
under warranty. This results in significant time and price savings as com- pared with ordering a new assembly.
Refer to Chapter 2, Replaceable Parts, for a complete list of exchange- able assemblies for all Series 373XXA models.
NOTE
When sending a failed assembly to the factory for ex- change, a copy of the Service Log must always accom- pany the failed assembly. Refer to Chapter 2, Replaceable Parts, for further information.
373XXA MM |
