Anritsu 373XXA manual General Information Recommended Test Equipment, Anritsu T1147-2

GENERAL INFORMATION RECOMMENDED TEST EQUIPMENT

Table 1-1.Recommended Test Equipment (2 of 2)

INSTRUMENT	CRITICAL	RECOMMENDED	USE*
	SPECIFICATION	MANUFACTURER/MODEL	*
Assurance Air Line	For models 37317A and below w/Opt 7A:	ANRITSU 18A50	P
	For models 37317A and below w/Opt 7N:	ANRITSU 18NF50
	For models 37317A and below w/Opt 7NF:	ANRITSU 18N50
	For models 37317A and above:	ANRITSU T1519
	For models 37317A and below w/Opt 7S:	ANRITSU T1147-2
Offset Termination	For models 37317A and below w/Opt 7A, 7N,	ANRITSU 29A50-20	P
	7NF:
	All other models	ANRITSU 29KF50-15
Frequency Counter	Frequency: 0.1 to 26.5 GHz	EIP Microwave, Inc., Model 578B	P, A
	Input Impedance: 50Ω
Digital Multimeter	Resolution: 412 digits	Any	T
	DC Accuracy: 0.1 %
	AC Accuracy: 0.1 %
Oscilloscope	Bandwidth: DC to 100 MHz	Tektronix, Inc.	T
	Sensitivity: 2 mV	Model 2445
	Horiz. Sensitivity: 50 ns/division
Power Meter 1, with:	Power Range: –30 to +20 dBm	HP 437B with Option 22 (GPIB)	P, A
	(1 mW to 100 mW)
	Other: GPIB controllable
Power Sensor 1	Frequency Range: 0.05 to 50 GHz	HP 8487A	P, A
or:	Power Range: –70 to +47 dBm
	(100 pW to 50 W)	Gigatronics 8541 or 8542
Power Meter 2, with:	Other: GPIB controllable	Gigatronics 80304A
Power Sensor 2	Frequency Range: 0.01 to 40 GHz
Power Meter and Power	Frequency Range: to 65 GHz	Anritsu Model ML24xxA Power Meter	P, A
Sensor		and MA2474A (40 GHz and below)
		and Model SC6230 (to 65 GHz)
		Power Sensors
Gauging Set	GPC-7 Gauging Set	ANRITSU 01-161	O, T
	K Connector Gauging Set	ANRITSU 01-162

∗∗USE CODES:

AAdjustment / Internal Hardware Calibration O Operational Testing

P Performance Verification T Troubleshooting

373XXA MM 1-11