APC NBRK0450, NBRK0550, NBRK0570 manual Restore, Serial Devices

Restore

Use the Restore icon to restore your appliance configuration using a configuration file created using the Backup icon.

For more information, see “Backup” on page 74.

To restore your appliance configuration:

1.Double-click the Restore icon.

2.In the Backup file field, enter the name and fully qualified path to the backup file or click Browse to navigate to the drive and directory in which the backup file is stored. Select the file then click OK.

3.In the Password field, enter the password used to protect the backup file.

4.Click OK. You will be prompted to reboot the appliance.

5.Click Reboot. The appliance automatically reboots. This may take a few minutes during which time Advanced View will be unavailable.

Serial Devices

Note: The Serial Devices icon appears only when you have connected a USB modem, Sealevel I/O device, Modbus USB-to-RS485 adapter, or APC Switched Rack PDU to the appliance.

For more information about supported USB modems, Sealevel I/O devices, and APC Switched Rack PDUs, and how they connect to the appliance, see the installation and quick configuration manual included with your appliance.

USB modems, Sealevel I/O devices, and APC Switched Rack PDUs all provide for serial RS-232 communication with the appliance. When these devices are connected to the appliance, the appliance detects the device and entries for serial ports automatically appear in the Serial Devices window. Through the Serial Devices window, you specify what kind of device is connected to each serial port. You can also label the port to which each device is connected.

If a previously detected serial port is no longer detected by the appliance (for example, if an APC Switched Rack PDU has been disconnected from the appliance), a Remove button appears beside the port. Click Remove to remove the port configuration.

NetBotz Appliance User’s Guide 99