Pelco PTZ camera controls
The Update button provides access to the Add/Update Presets display, used to specify or modify a name for preset camera positions, and configure a tour using those camera positions, for the selected Pelco PTZ camera.
To associate a camera position with a preset, select a preset from the list, use the arrow and zoom controls to position the camera, and click the Set button.
To view the live video for a preset, select a preset from the list, and click the Go button.
If you remove the camera from the NetBotz appliance, its preset camera locations and tour will be removed from the list in Advanced View. The camera will retain these preset definitions.
The following are additional camera controls for the supported Pelco PTZ (pan, tilt, zoom) cameras.
Control | Name | Description |
|
|
|
Pan Left
Click and hold to pan the camera left and right. You can also use the left and right arrow keys on your keyboard.
Pan Right
Tilt Up
Click and hold to tilt the camera up and down. You can also use the up and down arrow keys on your keyboard.
Tilt Down
Click and hold to zoom in. The camera will zoom in until you release the mouse or it will stop when it reaches maximum optical zoom. If you release
Zoom In the mouse and then click and hold the Zoom In button again, the image will magnify, but in a digital format. NOTE: You can also use the mouse wheel to zoom in while the pointer is on the image.
Zoom Out
Iris Open
Iris Close
Focus In
Focus Out
Point Camera
Click and hold to zoom out. You can also use the mouse wheel while the pointer is on the image.
Click and hold to increase the brightness.
Click and hold to decrease the brightness.
Click and hold to bring the background into focus.
Click and hold to bring the foreground into focus.
Click this button and then click and drag the mouse over the image to control the pan and tilt functions.
NetBotz Appliance User’s Guide | 22 |