License Keys
Use the License Keys icon to manage license
To enable a license
1.Select the application from the License Keys list and click Edit.
2.In the License Key field, enter the License Key you received when you purchased a license for the application, and click OK. A prompt to reboot the appliance appears.
3.Click Reboot. The appliance automatically reboots. This may take a few minutes, during which time Advanced View will be unavailable.
To disable a license
1.Select the application from the License Keys list and click Edit. A confirmation message appears, asking whether you want to remove the application.
2.Click OK. A prompt to reboot the appliance appears.
3.Click Reboot. The appliance automatically reboots. This may take a few minutes, during which time Advanced View will be unavailable.
Location
Use the Location icon to configure additional
To change the Location settings, select an appliance, pod, or sensor. Select the Location Data Type and click Edit to open the Edit Location Attribute window. Enter the new Location value and click OK. When you finish specifying Location values, click OK save your changes.
Log
The Log icon determines what events are stored and displayed in the Appliance Log. When you select a Global Level, the appliance saves only events with a log value equal to or lower than the selected Global Level. A low Global Level setting results in a high logging priority.
By default, all components log events at the level specified in the Global level field. You can specify a unique logging level for each component. The Component Log Levels available for logging are determined by appliance model and user access privileges. Some items may not be available on some models or to some user accounts. To specify a
Note: Use a minimum Log Level of 6 - Notice to ensure that log messages associated with alerts are recorded in the Audit Trail.
NetBotz Appliance User’s Guide | 86 |