APC NBRK0450, NBRK0550, NBRK0570 manual sms:sms_device_address, NetBotz Appliance User’s Guide

8.Check Enabled to enable the threshold. If this checkbox is not checked, the alert threshold is saved but is not active.

9.In Threshold-Specific Addresses, click Add... to enter the e-mail addresses of personnel to whom e-mail alert notifications should be sent if this threshold generates an alert condition. Click OK.

If you installed an SMS-capable modem you can deliver alert notification to SMS-enabled devices by entering threshold-specific addresses for them in the following format:

sms:sms_device_address

where sms_device_address is the telephone number or e-mail address associated with the SMS- enabled device (for example, “sms:5123334444” or “sms:user@mycorp.com”).

Threshold-specific notifications are sent only if your appliance has one or more Alert Actions defined that use the Send E-Mail Message alert notification method and

Include Addresses from Thresholds is checked. For more information, see “Alert Action” on page 30 and “Advanced View: Creating Alert Actions” on page 112.

10.Click Configure E-Mail Server to set up an e-mail server if one is required.

For more information on setting up an e-mail server, see “E-mail Server” on page 77.

11.In Alert Profile, choose the desired Alert Profile from the drop-down list. If you wish to edit the selected Alert Profile, click Edit Alert Profile....

For more information on Alert Profiles, see “Alert Profile” on page 32.

NetBotz Appliance User’s Guide 108