APC NBRK0570, NBRK0550, NBRK0450 manual Define the custom 4-20mAsensor, Click Remove Custom

–Define the custom 4-20mA sensor

a. Select 4-20mA sensor and click OK to open the Add Custom 4-20mA Sensor window. This window features the following fields and controls:

Field	Description
Sensor type label	The name of the custom sensor definition. Once
	defined, the Sensor Type Label appears only in the
	Sensor Type Installed drop-down list when
	specifying Sensor Pod external port settings.
Default sensor label	The label used, by default, for any new sensors added
	using this custom sensor definition.
	To modify the labels, see “Settings” on page 69.
mA 1	Specify two reference points (between 4 and 20 mA)
and	used to determine the full range of sensor values that
mA 2	correspond to the voltage readings reported by the
	sensor.
Minimum sensor	The lowest value reported by the sensor.
value
Maximum sensor	The highest value reported by the sensor.
value
Sensor increment	The numeric increments in which the sensor reading
	rises or falls.
Units	The unit of measurement used for this sensor.

b.Type in the appropriate values for the analog sensor hardware.

c.Click OK to add this sensor definition to the list of available Sensor Types.

Removing custom sensors. To remove a custom sensor:

1.Double-click Sensor Pods in the Configuration pane.

2.Select the sensor pod with the custom sensor and click External ports....

3.Click Remove Custom....

4.Select the sensor to be removed and click Ok.

NetBotz Appliance User’s Guide 73