Manuals / APC / Household Appliance / Home Security System

APC NBRK0550, NBRK0450, NBRK0570 manual sms:sms_device_address, NetBotz Appliance User’s Guide

Models: NBRK0550 NBRK0450 NBRK0570

1 152

Download 152 pages 42.21 Kb

Page 120

f.Unscheduled Remote Access Threshold - This is only available for Lock sensors and is not enabled by default. If a lock is opened with a remote command issued from Advanced View or the Web Client, an alert is generated. In order to allow remote access without generating an alert, you will need to modify the threshold schedule, disable the threshold for the desired timeframe, and disable the default “Unscheduled Access Threshold”. An unlock event will still be generated in the event log.

9.Check Enabled to enable the threshold. If this checkbox is not checked, the alert threshold is saved but is not active.

10.In Threshold-Specific Addresses, click Add... to enter the e-mail addresses of personnel to whom e-mail alert notifications should be sent if this threshold generates an alert condition. Click OK.

If you installed an SMS-capable modem you can deliver alert notification to SMS-enabled devices by entering threshold-specific addresses for them in the following format:

sms:sms_device_address

where sms_device_address is the telephone number or e-mail address associated with the SMS- enabled device (for example, “sms:5123334444” or “sms:user@mycorp.com”).

Threshold-specific notifications are sent only if your appliance has one or more Alert Actions defined that use the Send E-Mail Message alert notification method and Include Addresses from Thresholds is checked. For more information, see “Alert Action” on page 30 and “Advanced View: Creating Alert Actions” on page 112.

NetBotz Appliance User’s Guide

110

Image 120

APC NBRK0550, NBRK0450, NBRK0570 manual sms:sms_device_address, NetBotz Appliance User’s Guide

Contents

NetBotz Appliance User’s Guide NBRK0570 NBRK0550 NBRK0450 NBWL0455 NBWL0456NBWL0355 NBWL0356 Page Preface IntroductionWeb Client: Getting Started Web Client: Monitoring Your EnvironmentAdvanced View: Monitoring Your Environment Advanced View: Pod/Sensor Settings Output control label settings Advanced View: Configuring Appliances Advanced View: Defining Thresholds Symptoms and Solutions Advanced View: Creating Alert ActionsOverloaded Appliances BotzWare MacrosNetBotz Appliance User’s Guide viiiPreface U.S. Government Restricted RightsMisuse Availability of Open Source TechnologiesIntroduction System DefinitionBasic Concepts and Terminology SSL Support NetBotz Appliance User’s GuideWeb Client Getting Started System RequirementsAccessing the Web Client Choosing a LanguageSupported languages Interface Navigation Launching Advanced ViewNetBotz Appliance User’s Guide Web Client: Monitoring Your Environment Status tabAlerts tab Cameras tabPods tab NetBotz Appliance User’s Guide•Settings: Allows you to change the pod label Advanced View: Getting Started •A monitor capable of displaying a resolution ofSystem Requirements –Microsoft Windows XP Pro SP2 or SP3Software Installation Installing software on a Windows systemInstalling software on a Linux system Adding Appliances Removing AppliancesAccessing an Appliance Using Advanced View Using folders Interface NavigationNavigation pane Locking a Navigation pane selection Sensor Data Pane Action/Information Pane• Configure sensor • View graphAdvanced View Menus Using Advanced View POST-onlyMode Editing PreferencesAppearance preferences General preferencesAdvanced View Monitoring Your Environment Viewing Sensor Readings and StatusControlling Rack Access sensors Alerting SensorsDeleting a Pod Viewing Live Video Standard camera controlsPelco PTZ camera controls ControlName DescriptionControl NameDescription Resize Camera View CenterPelco PTZ Camera Presets Adding a Pelco PTZ Camera PresetModifying a Pelco PTZ Camera Preset Renaming a Pelco Camera PresetRecording Camera Images Viewing AlertsViewing Maps Resolving alertsSaving picture sequences to your system Viewing Graphs Creating and editing mapsViewing Historical Data Running a historical data reportExporting the data to a text file Event Log NetBotz Appliance User’s GuideAdvanced View: Pod/Sensor Settings Alert ActionPre-configuredalert actions Available alert notification methodsFor more information, see “SMS” on page Alert Profile Creating or editing alert actionsDefault alert profile Creating or editing an alert profileCreating an alert sequence Suppressing alert notifications 3.Check Suppress alert notifications untilCamera Pods SettingsCheck Enable video from camera FieldDescription Click Advanced SchedulingCapture settings Field DescriptionFlicker filter Field DescriptionPost-AlertCapture Time Mask settings Visual mode settings Masking a Pelco IP cameraNetBotz Appliance User’s Guide Sensor configuration Threshold configurationScanned Devices NetBotz Appliance User’s Guide Adding, editing, and removing SNMP targets ItemDescription Specifying global SNMP settings Adding or updating Device Definition Files Supplemental OIDs viewSensor settings IPMI Devices Adding, editing, and removing IPMI devicesSensor settings To modify a sensorModbus Slave System Assigning a slave ID to a podRemoving a slave ID from a pod Viewing the Modbus mapOutput Control Output control label settingsExporting the Modbus map Assigning a register address to a sensorOutput control external port settings ActionDescription 3.Click OK a.Select Switch Relay and click OK Output control sensor settings Periodic Reports Configuring periodic e-mailreportsConfiguring periodic FTP reports a.Click Advanced SchedulingField DescriptionGraph priority Configuring periodic HTTP reports a.Click Advanced SchedulingRack Access Pods Configuring the Rack Access Pod settingsConfiguring the Rack Access Pod sensors Threshold configurationRack Access System About the Rack Access System dialogSelecting a card format Registering cardsRegistering a card manually Editing card information2.Click Edit Deleting a cardCopying permissions between cards 1.Click Copy PermissionsRemoving a door from a card Adding an appliance Removing an applianceEditing an appliance Sensor Pods Settings SensorsExternal ports 1.Click Add custom –Define the custom analog sensor–Define the custom dry contact sensor –Define the custom 4-20mAsensor 3.Click Remove CustomAdvanced View: Configuring Appliances BackupClock Custom Audio Clips Data Center ExpertAdding custom audio clips 2.Click Add custom audio clipConfiguring DNS settings Configuring dynamic DNS settingsE-mailServer External StorageUsing an external storage system Using a Windows shareTo configure your appliance to use a Windows Share Using an NFS mount Removing external storageReclaiming external storage data Warning: Do not initialize the target shareIP Filter OverviewAdding new filters Filter Action IP AddressProtocol PortConfiguring IP filters Using CIDR bit-masksNetBotz Appliance User’s Guide Example configurations IP Address IncludeIP Address Exclude 0.0.0.0/32 IP Address ExcludeLicense Keys LocationModbus Slave Communication Network InterfacesNetBotz Appliance User’s Guide Enable Interface FieldDescription PPP/Modem The following controls appear in the Advanced tab FieldDescription FieldPPPperformance considerations NetBotz Appliance User’s GuideUsing SIM security Upgrading over PPPNetBotz Appliance User’s Guide Pod, Pelco Camera, and Rack Access PX-HIDSharing To designate shared sensor pods Setting up a Pelco shared IP camera pod Setting up shared IP camera podsNetBotz Appliance User’s Guide Rack Access Settings ProxyRegion Configuring the available language files2.Select Check APC Website and click Next Restore Serial DevicesPage SNMP commandsPage Upgrade Users7.Select a Login failure alert severity 8.Select a Login failure alert profileLost password recovery •User ID: apc •Password: apc•User ID: root •Password: apc Web Server Basic TabAdvanced tab Advanced View: Defining Thresholds Defining Analog Thresholdssms:sms_device_address NetBotz Appliance User’s GuideDefining State Thresholds sms:sms_device_address NetBotz Appliance User’s GuideAdvanced Threshold Settings Advanced View: Creating Alert Actions Creating an activate button output alert action 3.Select Activate Button Output and click OKCreating a play audio alert action Creating a play custom audio alert action 3.Select Play Custom Audio Alert and click OKCreating a send custom HTTP GET alert action 3.Select Send Custom HTTP GET and click OKNetBotz Appliance User’s Guide 1.Double-clickthe Alert Actions icon Creating a send data to FTP server alert action 3.Select Send Data to FTP Server and click OK15.Click OK to save this Alert Action Creating a send e-mailalert action 17.Click OK to save this Alert Action Creating a send HTTP post alert action Creating a send short message e-mailalert action 3.Select Send Short Message E-Mail and click OKd.Click to Send Both HTML and Plain Text Message Creating a send SNMP v1 trap alert action3.Select Send SNMP v1 Trap and click OK 8.In the Advanced tab, enter the Trap Port NumberCreating a send wireless SMS message alert action Creating a send SNMP v3 inform alert action3.Select Send SNMP v3 Inform and click OK d.Specify a Message Validity Period e.Click to Send Both HTML and Plain Text MessageCreating a set beacon output state alert action 3.Select Set Beacon Output State and click OK3.Select Set Output Switch 1 and click OK Creating a set switch output state alert action 3.Select Set Switch Output State and click OKCreating a set outlet state alert action 3.Select Set Outlet State and click OKCreating a set lock output state alert action 3.Select Set Lock Output State and click OKCreating a set reader output state alert action 3.Select Set Reader Output State and click OKBotzWare Macros Appliance MacrosLocation Macros Macro DefinitionExample $ROOMAlert Macros MacroDefinition ExampleMacro DefinitionExample $ALERT LEVELOverloaded Appliances Symptoms and Solutions SymptomsSolutions NetBotz Appliance User’s Guide Verifying Signed M-JPEGAVI Files Output ExamplesRadio Frequency Interference 警告使用者USA—FCC Canada-ICESAPC Worldwide Customer Support 990-3288E2/2013