Field | Description |
|
|
Default relay output | The label used, by default, for any new output types |
label | added using this custom output definition. |
| To modify a label, see “Output control sensor |
| settings” on page 57. |
Unpressed value | The text describing the relay in its unpressed state. |
Pressed value | The text describing the relay in its pressed state. |
Active time (seconds) | The time in seconds that the relay remains in a |
| pressed state before reverting to the unpressed state. |
Button contact type | Specifies whether the relay is in an on or off state |
| when pressed. |
c.Enter the appropriate values for the Button Relay action.
d.Click OK to add this output action to the list of available output actions.
•Switch Relay actions cause the relay device to switch from its current state (On or Off) to its alternate state. Once switched, the relay remains in the new state until another switch action changes its state again. To create a Switch Relay action:
a.Select Switch Relay and click OK.
b.The Add Switch Relay Output window features the following fields and controls:
Field | Description |
|
|
Relay output type | The name of the custom output action definition. |
| Once defined, the Output Type label appears only in |
| the Relay Output Type selection list when |
| specifying output control external port settings. |
Default relay output | The label used, by default, for any new output types |
label | added using this custom output definition. |
| To modify a label, see “Output control sensor |
| settings” on page 57. |
On value | The text that describes the relay in its on state. |
Off value | The text that describes the relay in its off state. |
Switch initial state | The state (On or Off) of the relay at the time the |
| output action is assigned. |
| This is also the state to which the switch is set when |
| the appliance is turned on, regardless of what state |
| the switch was in when the appliance was turned off. |
c.Enter the appropriate values for the Switch Relay action.
d.Click OK to add this output action to the list of available output actions.
NetBotz Appliance User’s Guide | 56 |
