APC NBRK0570, NBRK0550, NBRK0450 manual Click to Send Both Html and Plain Text Message

8.In the Advanced tab:

a.If you do not want e-mail notifications sent when sensor readings return to a normal state, check Do Not Send Return-To-Normal Messages.

b.To include only the header information necessary to ensure delivery of the e-mail message, check Minimize Header Usage.

c.Specify a Message Size Limit (bytes) for e-mail messages generated by this alert action.

d.Click to Send Both HTML and Plain Text Message.

9.Click OK to save this Alert Action.

Creating a send SNMP v1 trap alert action

To create an Alert Action to use Send SNMP v1 Trap alert notification:

1.Double-click the Alert Actions icon.

2.Click Add... to open the Add Alert Action window.

3.Select Send SNMP v1 Trap and click OK.

4.Enter a name for this alert action in Alert action name.

5.Specify Advanced Scheduling (optional). By default, all Alert Actions are active 24 hours a day, 7 days a week. You can specify an Alert Action to be active only when alert conditions occur during specific time ranges. To configure Advanced Scheduling:

a.Click Advanced Scheduling.... The Advanced Scheduling window opens.

b.By default, all time periods are Enabled. To disable the alert action, click-and-drag to highlight the time range, and click Disable. To enable a disabled time range, click-and-drag to highlight the time range, and click Enable.

c.Click OK to save the schedule and return to the Add Alert Action window.

6.Check the alert Severities that apply to buttons to be activated.

7.In the Basic tab, type in the Target Host Address field the Hostname or IP address of the SNMP based management system, and the Community String field the target-specific community string used when sending traps to the Target Host Address.

8.In the Advanced tab, enter the Trap Port Number.

9.Click OK to save this Alert Action.

NetBotz Appliance User’s Guide 124