APC NBRK0450, NBRK0550, NBRK0570 manual Adding Appliances, Removing Appliances

Adding Appliances

Before using Advanced View to manage an appliance, you must first add the appliance IP address or hostname to the Appliance list. To add an appliance to the Appliance list:

1.Click Add Appliance. The Add Host Device window opens.

2.In the IP Address or Hostname field, type the IP address or hostname of the appliance.

3.In the Port field, type the TCP port through which you will communicate with this appliance. The default value is 80.

4.To use SSL encryption to communicate with this appliance, check Connect Using SSL.

5.If you want to be logged out after a period of inactivity, select Auto Logoff and specify the length of idle time before you are logged out in the provided field. Click OK.

Once you have added an appliance to the Appliance list, Advanced View automatically loads data from the appliance into Advanced View. Navigate to an appliance by selecting the appliance address or hostname from the Appliance list. If you specified Use SSL when adding the appliance, SSL appears in the selection list beside the appliance IP address or hostname.

Removing Appliances

To remove an appliance from the Appliance list:

1.Select Remove Appliance from the File menu. The Remove Appliance window opens.

2.Select the appliance you want to remove from the list of appliances.

3.Click Remove to remove the appliance from the Appliance list.

NetBotz Appliance User’s Guide 12