APC NBRK0550, NBRK0450, NBRK0570 manual Click Add custom, Define the custom analog sensor

To add a custom sensor:

1.Click Add custom....

2.Select the type of sensor you want to define and click OK.

–Define the custom analog sensor

a.Select Analog (0-3.3V)or Analog (0-5.0V),click OK to open the Add Analog Sensor window.

This window features the following fields and controls:

Field	Description
Sensor type	The name of the custom sensor definition. Once
	defined, the Sensor type label appears only in the
	Sensor Type Installed drop-down list when
	specifying Sensor Pod external port settings.
Default sensor label	The label used, by default, for any new sensors added
	using this custom sensor definition.
	To modify the labels, see “Settings” on page 69.
Volts 1	Specify 2 reference points (between 0 and 3.3 volts
and	for 0-3.3V analog sensors and between 0 and 5.0
Volts 2	volts for 0-5.0V analog sensors) that determine the
	range of sensor values that correspond to the voltage
	readings reported by the sensor.
Sensor Value (2)

Minimum sensor value The lowest value reported by the sensor.

Maximum sensor value The highest value reported by the sensor.

Sensor increment	The numeric increments in which the sensor reading
	rises or falls.
Units	The unit of measurement for this sensor.

b.Enter the appropriate values for the analog sensor hardware.

c.Click OK to add this sensor definition to the list of available Sensor Types.

NetBotz Appliance User’s Guide 71