APC NBRK0450, NBRK0550, NBRK0570 manual Creating a set reader output state alert action

Creating a set reader output state alert action

To create an Alert Action to use the Set Reader Output State alert notification:

1.Double-click the Alert Actions icon to open the Alert Action window.

2.Click Add to open the Select Notification Method window.

3.Select Set Reader Output State and click OK.

4.Enter a name for this alert action in Alert action name.

5.Specify Advanced Scheduling (optional). By default, all Alert Actions are active 24 hours a day, 7 days a week. You can specify an Alert Action to be active only when alert conditions occur during specific time ranges. To configure Advanced Scheduling:

a.Click Advanced Scheduling.... The Advanced Scheduling window opens.

b.By default, all time periods are Enabled. To disable the alert action, click-and-drag to highlight the time range, and click Disable. To enable a disabled time range, click-and-drag to highlight the time range, and click Enable.

c.Click OK to save the schedule and return to the Add Alert Action window.

6.Check the alert Severities that apply to buttons to be activated.

7.Select the state of the lock when an alert occurs from Switch Reader State on Alert.

8.In New Reader State on Return-to-Normal, select the state of the lock when the violated threshold returns to a normal state.

9.Click OK to save this Alert Action.

NetBotz Appliance User’s Guide 132