APC NBRK0550, NBRK0450, NBRK0570 manual Deleting a Pod

To enable or disable a card reader in Advanced View:

1.From the Navigation pane, select a Rack Access Pod.

2.Right-click the Reader sensor in the Sensor Data pane.

3.Select Reader (n): Set to “Disabled” next to the desired card reader. The reading will change to

Disabled and the button label will read Reader (n): Set to “Enabled”.

Note: A physical key can always be used to access the rack regardless of whether the card reader is enabled or disabled.

Deleting a Pod

When a pod is disconnected from an appliance, you can delete it from the Navigation pane. You cannot delete integrated pods.

1.Disconnect the pod from the appliance. The symbol for the pod in the Navigation pane will dim.

2.From the Navigation pane, right-click the pod and select Delete pod.

3.Click Remove to confirm the deletion.

NetBotz Appliance User’s Guide 20