The following output control actions are available when the output control device is wired between the NC (Normally Closed) and COM terminals on the appliance:
Action | Description |
|
|
None | No output action is associated with this port. |
When activated, a normally closed (NC) relay is switched to a | |
(NC) | closed state for 1 second, and then switched back to open. |
When activated, a normally open (NO) relay is switched to an | |
(NO) | open state for 1 second, and then switched back to closed. |
Switch (NC) | When activated, a normally closed (NC) relay is switched to a |
| closed state. |
Switch (NO) | When activated, a normally open (NO) relay is switched to an |
| open state. |
When activated, a normally closed (NC) relay is switched to a | |
(NC) | closed state for 10 seconds, and then switched back to open. |
When activated, a normally open (NO) relay is switched to an | |
(NO) | open state for 10 seconds, and then switched back to closed. |
Reboot Button | When activated, power to the outlet is interrupted for 10 seconds, |
| and then restored. |
2.In the Port Label field, type a label to identify the device connected to the output control device port.
3.Click OK.
Defining custom output action types. You can add custom output action types by clicking Add Custom.... Once created, custom output action types are available from the Relay Output Type list.
Note: Custom output action types can only be added or removed. They cannot be edited. View the custom settings for selected output action types by clicking View Custom.
To create a custom output action type, click Add Custom... and select either Button Relay or Switch Relay:
•Button Relay actions cause the state of the relay device to switch from its default or unpressed state to its pressed state for a specified period of time, after which the relay automatically reverts to the unpressed state. To create a Button Relay action:
a.Select Button Relay and click OK.
b.The Add Button Relay Output window opens. This window features the following fields and controls:
Field | Description |
|
|
Relay output type | The name of the custom output action definition. |
| Once defined, the output type label appears only in |
| the Relay Output Type list when specifying output |
| control external port settings. |
NetBotz Appliance User’s Guide | 55 |
