Manuals / APC / Household Appliance / Home Security System

APC NBRK0570 manual Field, Description, Check Enable video from camera, Click Advanced Scheduling

Models: NBRK0550 NBRK0450 NBRK0570

1 152

Download 152 pages 42.21 Kb

Page 47

Field		Description

Speaker Label	An additional label for the speaker on this pod (camera pods and
	CCTV adapter pods only).
Unplugged Alert Severity	The severity of alerts generated if this device is unplugged.
Unplugged Alert Profile	The actions taken if the camera pod is unplugged. By default, the
	default alert profile is used for all thresholds. If you create
	additional alert profiles, you can specify an alert profile other than
	default.
Enable video from camera	Enable video output from the camera pod. You can set an Advanced
	Schedule that specifies times at which video output is enabled. To
	configure Advanced Scheduling:
	1.	Check Enable video from camera.
	2.	Click Advanced Scheduling.
	3.	By default, all time periods in the schedule are Enabled. To
		disable video output for a period of time, click and drag to
		select the time range, and click Disable.
	4.	Click OK.

Enable audio from camera drop-down Select the conditions that cause audio streaming from the camera

listpod to the Advanced View Camera View. This option is available only when configuring camera pods.

Interactive Frame Rate Limit (Percent) Specify what percentage of the total possible frame rate for a given camera resolution is available to users that are using the appliance interactively.

	For example, if you specified an Interactive Frame Rate Limit of
	50% and your maximum frame rate for 640x480 resolution is 10
	frames per second, you can only select frame rate values of up to 5
	frames per second.
Interactive Mode Limit	The maximum image resolution available to users that are using the
	appliance interactively. This limits the performance impact caused
	by multiple clients with high image resolution settings accessing
	your appliances interactively.

For example, if you specified an Interactive Mode Limit of 320x240, the maximum resolution mode available in the Camera View of Advanced View is 320x240.

When you finish updating the camera settings, click OK. Click Cancel to close this window without saving any changes.

NetBotz Appliance User’s Guide

37

Image 47

APC NBRK0570, NBRK0550, NBRK0450 manual Field, Description, Check Enable video from camera, Click Advanced Scheduling

Contents

NBWL0355 NBWL0356 NetBotz Appliance User’s GuideNBRK0570 NBRK0550 NBRK0450 NBWL0455 NBWL0456 Page Web Client: Monitoring Your Environment PrefaceIntroduction Web Client: Getting StartedAdvanced View: Monitoring Your Environment Advanced View: Pod/Sensor Settings Output control label settings Advanced View: Configuring Appliances Advanced View: Defining Thresholds BotzWare Macros Symptoms and SolutionsAdvanced View: Creating Alert Actions Overloaded Appliancesviii NetBotz Appliance User’s GuideAvailability of Open Source Technologies PrefaceU.S. Government Restricted Rights MisuseBasic Concepts and Terminology IntroductionSystem Definition NetBotz Appliance User’s Guide SSL SupportSystem Requirements Web Client Getting StartedSupported languages Accessing the Web ClientChoosing a Language NetBotz Appliance User’s Guide Interface NavigationLaunching Advanced View Status tab Web Client: Monitoring Your EnvironmentNetBotz Appliance User’s Guide Alerts tabCameras tab Pods tab•Settings: Allows you to change the pod label –Microsoft Windows XP Pro SP2 or SP3 Advanced View: Getting Started•A monitor capable of displaying a resolution of System RequirementsInstalling software on a Linux system Software InstallationInstalling software on a Windows system Removing Appliances Adding AppliancesAccessing an Appliance Using Advanced View Navigation pane Using foldersInterface Navigation Locking a Navigation pane selection • View graph Sensor Data PaneAction/Information Pane • Configure sensorAdvanced View Menus General preferences Using Advanced View POST-onlyModeEditing Preferences Appearance preferencesAlerting Sensors Advanced View Monitoring Your EnvironmentViewing Sensor Readings and Status Controlling Rack Access sensorsDeleting a Pod Standard camera controls Viewing Live VideoDescription Pelco PTZ camera controlsControl NameResize Camera View Center ControlName DescriptionRenaming a Pelco Camera Preset Pelco PTZ Camera PresetsAdding a Pelco PTZ Camera Preset Modifying a Pelco PTZ Camera PresetViewing Alerts Recording Camera ImagesSaving picture sequences to your system Viewing MapsResolving alerts Creating and editing maps Viewing GraphsExporting the data to a text file Viewing Historical DataRunning a historical data report NetBotz Appliance User’s Guide Event LogAvailable alert notification methods Advanced View: Pod/Sensor SettingsAlert Action Pre-configuredalert actionsFor more information, see “SMS” on page Creating or editing alert actions Alert ProfileCreating or editing an alert profile Default alert profileCreating an alert sequence 3.Check Suppress alert notifications until Suppressing alert notificationsSettings Camera PodsClick Advanced Scheduling Check Enable video from cameraField DescriptionCapture settings Flicker filter FieldDescription Post-AlertCapture Time FieldDescription Mask settings NetBotz Appliance User’s Guide Visual mode settingsMasking a Pelco IP camera Threshold configuration Sensor configurationScanned Devices NetBotz Appliance User’s Guide Description Adding, editing, and removing SNMP targetsItem Specifying global SNMP settings Supplemental OIDs view Adding or updating Device Definition FilesSensor settings Adding, editing, and removing IPMI devices IPMI DevicesTo modify a sensor Sensor settingsViewing the Modbus map Modbus Slave SystemAssigning a slave ID to a pod Removing a slave ID from a podAssigning a register address to a sensor Output ControlOutput control label settings Exporting the Modbus mapDescription Output control external port settingsAction 3.Click OK a.Select Switch Relay and click OK Output control sensor settings Configuring periodic e-mailreports Periodic Reportsa.Click Advanced Scheduling Configuring periodic FTP reportsGraph priority FieldDescription a.Click Advanced Scheduling Configuring periodic HTTP reportsConfiguring the Rack Access Pod settings Rack Access PodsThreshold configuration Configuring the Rack Access Pod sensorsRegistering cards Rack Access SystemAbout the Rack Access System dialog Selecting a card formatDeleting a card Registering a card manuallyEditing card information 2.Click EditRemoving a door from a card Copying permissions between cards1.Click Copy Permissions Editing an appliance Adding an applianceRemoving an appliance Sensor Pods Sensors SettingsExternal ports –Define the custom analog sensor 1.Click Add custom–Define the custom dry contact sensor 3.Click Remove Custom –Define the custom 4-20mAsensorClock Advanced View: Configuring AppliancesBackup 2.Click Add custom audio clip Custom Audio ClipsData Center Expert Adding custom audio clipsConfiguring dynamic DNS settings Configuring DNS settingsExternal Storage E-mailServerUsing a Windows share Using an external storage systemTo configure your appliance to use a Windows Share Removing external storage Using an NFS mountWarning: Do not initialize the target share Reclaiming external storage dataAdding new filters IP FilterOverview Port Filter ActionIP Address ProtocolNetBotz Appliance User’s Guide Configuring IP filtersUsing CIDR bit-masks IP Address Exclude Example configurationsIP Address Include IP Address Exclude 0.0.0.0/32Location License KeysNetBotz Appliance User’s Guide Modbus Slave CommunicationNetwork Interfaces Description Enable InterfaceField PPP/Modem Field The following controls appear in the Advanced tabField DescriptionNetBotz Appliance User’s Guide PPPperformance considerationsNetBotz Appliance User’s Guide Using SIM securityUpgrading over PPP Pod, Pelco Camera, and Rack Access PX-HIDSharing To designate shared sensor pods Setting up shared IP camera pods Setting up a Pelco shared IP camera podNetBotz Appliance User’s Guide Proxy Rack Access Settings2.Select Check APC Website and click Next RegionConfiguring the available language files Serial Devices RestorePage commands SNMPPage Users Upgrade8.Select a Login failure alert profile 7.Select a Login failure alert severity•User ID: root •Password: apc Lost password recovery•User ID: apc •Password: apc Advanced tab Web ServerBasic Tab Defining Analog Thresholds Advanced View: Defining ThresholdsNetBotz Appliance User’s Guide sms:sms_device_addressDefining State Thresholds NetBotz Appliance User’s Guide sms:sms_device_addressAdvanced Threshold Settings Advanced View: Creating Alert Actions Creating a play audio alert action Creating an activate button output alert action3.Select Activate Button Output and click OK 3.Select Play Custom Audio Alert and click OK Creating a play custom audio alert action3.Select Send Custom HTTP GET and click OK Creating a send custom HTTP GET alert actionNetBotz Appliance User’s Guide 1.Double-clickthe Alert Actions icon 3.Select Send Data to FTP Server and click OK Creating a send data to FTP server alert action15.Click OK to save this Alert Action Creating a send e-mailalert action 17.Click OK to save this Alert Action Creating a send HTTP post alert action 3.Select Send Short Message E-Mail and click OK Creating a send short message e-mailalert action8.In the Advanced tab, enter the Trap Port Number d.Click to Send Both HTML and Plain Text MessageCreating a send SNMP v1 trap alert action 3.Select Send SNMP v1 Trap and click OK3.Select Send SNMP v3 Inform and click OK Creating a send wireless SMS message alert actionCreating a send SNMP v3 inform alert action e.Click to Send Both HTML and Plain Text Message d.Specify a Message Validity Period3.Select Set Beacon Output State and click OK Creating a set beacon output state alert action3.Select Set Output Switch 1 and click OK 3.Select Set Switch Output State and click OK Creating a set switch output state alert action3.Select Set Outlet State and click OK Creating a set outlet state alert action3.Select Set Lock Output State and click OK Creating a set lock output state alert action3.Select Set Reader Output State and click OK Creating a set reader output state alert actionLocation Macros BotzWare MacrosAppliance Macros $ROOM MacroDefinition ExampleExample Alert MacrosMacro Definition$ALERT LEVEL MacroDefinition ExampleSymptoms Overloaded Appliances Symptoms and SolutionsSolutions NetBotz Appliance User’s Guide Output Examples Verifying Signed M-JPEGAVI FilesCanada-ICES Radio Frequency Interference警告使用者 USA—FCC2/2013 APC Worldwide Customer Support990-3288E