U S I N G O S C A R

Apex OutLook 140DX/180DX Switch User Guide

37

CHANGING STATUS FLAG ATTRIBUTES

CHANGING STATUS FLAG ATTRIBUTES

The status flag indicates the name or port number of the cur- rently selected computer. You can choose to display the status flag at all times, for a few seconds after switching, or not at all. You can also change the color of the status flag and its location on the screen.

To change status flag attributes:

1On the Advanced Menus screen, highlight the Setup menu.

2Highlight Flag and press ENTER. The Flag Configuration screen appears.

3Highlight the settings you want to change and use the + or key to adjust the values. The Flag Appearance Settings table on the following page describes each of the available menu attributes.

4Press ESC to save the settings and exit the menu.

or

Press F10 to restore default settings.

or

Press ESC to exit the menu without saving the settings.

Page 37
Image 37
Apex Digital model 140DX manual Changing Status Flag Attributes, To change status flag attributes