U S I N G O S C A R Apex OutLook 140DX/180DX Switch User Guide | 41 |
SCANNING THE COMPUTERS (CONTINUED) |
|
|
|
|
|
Removing a computer from the scan list
To remove a computer from the scan list:
1On the Scan Pattern Setup screen, type the port number of the computer to be removed.
If your computers are listed by name, type the first few letters of the name of the computer.
2Highlight the Sec column.
3Type 0 for the number of seconds.
Press DELETE while on the Scan Pattern Setup screen to delete the highlighted computer and all entries below it.
4Press ENTER to save the settings and exit the menu. The new scan pattern replaces the standard or previous custom scan pattern.
Press F10 to restore default settings.
Press ESC to exit the menu without saving the settings.
