Apex Digital model 140DX B

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful interference, in

which case the user will be required to correct the interference at his own expense.

Properly shielded and grounded cables and connectors must be used in order to meet

FCC emission limits. IBM is not responsible for any radio or television interference

caused by using other than recommended cables and connectors or by unauthorized

changes or modifications to this equipment. Unauthorized changes or modifications

could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-

ing two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de classe A est conforme à la norme NMB-003 du Canada.

Attention: This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take adequate

measures.

Notice to Customers

This apparatus is approved under approval number NS/G/1234/J/100003 for indirect

connection to public telecommunication systems in the United Kingdom.

This product is in conformity with the protection requirements of EU Council Directive

89/336/EEC on the approximation of the laws of the Member States relating to elec-

tromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy

the protection requirements resulting from a nonrecommended modification of the

product, including the fitting of non-IBM option cards.

This product has been tested and found to comply with the limits for Class A Informa-

tion Technology Equipment according to CISPR 22/European Standard EN 55022.

The Limits for Class A equipment were derived for commercial and industrial environ-

ments to provide reasonable protection against interference with licensed communi-

cation equipment.

B REGULATORY COMPLIANCE NOTICES