A p p e n d i x | Apex OutLook 140DX/180DX Switch User Guide | 66 |
C POWER CORD SET REQUIREMENTS
The power cord set meets the requirements for use in the country where you purchased your equipment. The voltage selection switch allows you to select the appropriate line voltage for your server.
Power cord sets for use in other countries must meet the require- ments of the country where you use the server. For more infor- mation on power cord set requirements, contact your Authorized Apex Dealer.
General Requirements
The requirements listed below are applicable to all countries:
!The length of the power cord must be at least 6.0 feet (1.8 m) and a maximum of 12 feet (3.7 m).
!The power cord set must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord will be used.
!The power cord set must have a minimum current capacity and nominal voltage rating of 10 A/125 volts AC, or 10A/ 250 volts AC, as required by each country’s power system.
!The appliance coupler must meet the mechanical configura- tion of an EN60320/IEC 320 Standard Sheet C13 Connector, for mating with the appliance outlet on the computer.
