U S I N G O S C A R

Apex OutLook 140DX/180DX Switch User Guide

44

BROADCASTING COMMANDS (CONTINUED)

To broadcast to tiered configurations:

1From the OSCAR Selection screen at the primary switch, highlight the port number of the secondary switch (for example, Port 1-1, 2-1, 3-1, etc) to which you want to broadcast commands; press ENTER.

2Press PRINT SCREEN twice; the OSCAR Selection screen of the secondary switch appears. Press F2 to access the Advanced Menus screen.

3From the Setup menu, highlight Broadcast. Press ENTER to access the Broadcast Settings menu.

4For each port select which computers receive keyboard and/ or mouse commands by using the + or key to choose YES or NO.

5Press ENTER to save the settings.

6Press PRINT SCREEN once to access the primary switch.

7Repeat steps 1–6 to send broadcast commands to computers attached to additional secondary switches.

8From the Setup menu in the Advanced Menus at the primary switch, highlight Broadcast. Press ENTER; the Broadcast Settings menu appears.

9For each port select which computers receive keyboard and/ or mouse commands by using the + or key to choose YES or NO.

10Press ENTER to save the settings.

11From the Commands menu in the Advanced Menus screen at the primary switch, highlight Broadcast. Press ENTER to turn on the broadcast mode.

12From the OSCAR Selection screen at the primary switch, highlight the port number of the secondary switch for which you want to broadcast commands; press ENTER.

13Press PRINT SCREEN twice; then press F2. From the Com- mands menu in the Advanced Menus screen highlight Broadcast, then press ENTER to turn on the broadcast mode on the secondary switch.

Page 44
Image 44
Apex Digital model 140DX manual To broadcast to tiered configurations