Apple Using PowerBook 145B Backup for the first time, PowerBook 145B Backup program opens

Using PowerBook 145B Backup for the first time

When you use the PowerBook 145B Backup program for the first time, you should make a copy of your System Folder, and then a copy of all the files on your hard disk. Follow these steps:

1.Open the PowerBook 145B Backup program by double- clicking its icon.

h

The PowerBook 145B Backup program opens.

2.Make sure your floppy disks are high-density. Then click the Continue button.

A message appears, telling you how many high-density disks you need to make the copy and approximately how long it will take. Make sure you have enough time and disks to complete the copying. If you stop the copying before it’s finished, you’ll have to start over again from the beginning.

3.Click the appropriate button.

m The first time through, click Copy System Folder. m The second time through, click Copy All Files.

4.Insert a high-density floppy disk into the disk drive.

5.Follow the instructions on the screen until a message tells you that you’re finished. As you remove each disk from the computer, label it so you can find it again later.

6.Repeat steps 1-5 and make a backup copy of all files on your hard disk.

7.When you’re finished, be sure the floppy disks are properly labeled and locked, then store them in a safe, cool place.

120 Chapter 8: Using Disks