ARM CM940T Note, nSRST, nTRST, 1.2.5Multi-ICEconnector

Introduction

1.2.5Multi-ICE connector

The Multi-ICE connector enables JTAG hardware debugging equipment, such as Multi-ICE, to be connected to the core module. It is possible to both drive and sense the system-reset line (nSRST), and to drive JTAG reset (nTRST) to the core from the Multi-ICE connector. See Multi-ICE support on page 3-21.

Note

JTAG test equipment supplied by other vendors may also be used.

ARM DUI 0125A © Copyright ARM Limited 1999. All rights reserved. 1-7