Arturia 2 manual ENV1, LFO MOD Rise, Lfo Mod, Bender, Portamento

LFO Selector to choose either a manual setting (via the fader), LFO or

Menvelope 1 as a source for the pulse width modulation.

ENV1

The VCO modulator section

7.1.8 The LFO MODULATION, PORTAMENTO and BEND section

The “LFO MOD” section shows the parameters that can be modulated by the LFO. There is a white button to activate the LFO. When it is pressed, the modulation is activated. When it is raised, the modulation stops.

LFO MOD RISE	Knob to set the triggering time of the LFO.
LFO MOD	Chooses the destinations that can be modulated by the LFO:
	• ON / OFF switch (« VCO »)
	• ON / OFF switch (« VCF »)
VCO level	Slider to set the level of modulation from the LFO to the VCO
VCF level	Slider to set the level of modulation from LFO to the VCF
BEND	Selectors of the destinations that can be modulated by the PITCH
	BEND
	• ON / OFF switch (« VCO 1»)
	• ON / OFF switch (« VCO 2»)
	• ON / OFF switch (« VCF »)
VCO level	Slider to set the intensity of the BEND modulation affecting the VCO
	(From 0 To +24 semi-tones / – 24 semi-tones).
VCF level	Slider to set the intensity level of the BEND modulation affecting the
	VCF.
BENDER	Pitch bender (movement towards the left: the tuning is diminished;
	movement towards the right, the tuning of the oscillators is
	increased)
PORTAMENTO	Slider to set the level of portamento.
level
PORTAMENTO	Switch to use the portamento:
select	• Connection Section UPPER (« UPPER ONLY»)
	• Connection PORTAMENTO OFF
	• Connection Sections LOWER et UPPER (« ON »)

72 ARTURIA – JUPITER-8V – USER’S MANUAL