Arturia 2 manual Steps, Length, Link

Mode Playing modes of the sequencer:

•FORWARD: Playing the sequence forward

•BACKWARD: Playing the sequence backward

•FORWD/ BACKWD: Playing the sequence forward and backward

•RANDOM: Playing the sequence randomly

SMOOTH Amount of interpolation between values of each step in a sequence.

SWING Automatically bring a ternary quantification to the sequence. This parameter will be very useful to add “groove” to a sequence for hip hop music, for example.

ACCENT Bring an additional modulation to the selected step thanks to an “Attack” / “Decay” envelope applied to the cutoff frequency of the VCF low pass filter. This unit is comparable to the one that is located on the very famous TB303. The possibility to edit the attack time was added to the original unit to allow more flexibility.

•A: Attack time of the accent envelope

•D: Decay time of the accent envelope

•LEVEL: Knob that controls the modulation amount of the accent to the low pass VCF Filter.

The transport section

7.2.2 Edit the sequence

The editable part of the sequencer is located in the center of the sequencer's interface.

Edit tools	Five tools are available for editing the sequence:
	• Pencil: drawing of the values of the steps
	• Line: drawing of the values of the steps in line
	• Eraser: Delete certain values and settings
	• Noise: Automatically create a sequence
	• Reset: Reset the sequencer
STEPS	The steps. They contain bi-directional values (positive or negative).
LENGTH	To set the length of the sequence, 32 steps maximum.
LINK	Link the selected step with the following step, « Legato »).

ARTURIA – JUPITER-8V – USER’S MANUAL 77