Arturia 2 manual Buttons, Switches, Pitch Bend wheel

A rotary knob

6.3.1.2 Sliders

These controls are vertical and linear. They set a continuous setting (cutoff frequency of the VCF filters, or settings of the two ADSR envelopes, for example)

A vertical slider

6.3.2 Buttons

There are several types of buttons on the Jupiter-8V. Some activate or deactivate a parameter (activation of the arpeggiator, for example). A red led on the button indicates that the parameter is active.

A selection button

6.3.3 Switches

There are several types of switches on the Jupiter-8V. Certain ones activate/deactivate a parameter. For example, one is used to turn “ON” or “OFF” modulation towards oscillator synchronization. To change its state, simply click the switch.

A switch

6.3.4 Pitch Bend wheel

The Pitch bend controls the frequency/pitch of the synthesizer oscillators. Simply click on the wheel while playing a note on the master keyboard or from a sequencer, then move

ARTURIA – JUPITER-8V – USER’S MANUAL 53