Creating a RAID 1 set (Mirror)

To create a RAID 1 set:

1.From the Define a New Array menu, select RAID Mode, then press <Enter>. A pop-up menu appears.

2.Use the up or down arrow keys to select Mirroring, then press <Enter>.

Mirroring

Striping

Stripe Mirroring

Spanning

5.Press <TAB> to move to the Free Disks section.

6.Highlight the hard disk drives that you want to add in the RAID set, then press the right arrow key to select. The selected hard disk drives appear in the Array Disks section. Repeat the process until all desired hard disk drives are added.

 

 

 

NVIDIA RAID Utility

Oct 5 2004

 

 

 

- Define a New Array -

 

 

 

 

 

 

 

 

RAID Mode:

Mirroring

 

 

Striping Block:

Optimal

 

 

 

 

 

 

 

 

 

 

Free Disks

 

 

Array Disks

 

Loc

Disk Model Name

 

 

Loc

Disk Model Name

 

 

 

 

 

 

 

 

 

 

 

 

1.0.M

XXXXXXXXXXXXXXXXXX

 

 

 

1.0.M

XXXXXXXXXXXXXXXXXX

 

1.1.M

XXXXXXXXXXXXXXXXXX

 

 

[→] Add

 

 

 

 

 

2.0.M

XXXXXXXXXXXXXXXXXX

 

 

 

 

 

 

 

 

2.1.M

XXXXXXXXXXXXXXXXXX

 

 

 

 

 

 

 

 

 

 

 

 

 

[←] Del

 

 

 

 

 

[F6]

Back [F7] Finish

[TAB] Navigate

[↑↓] Select [ENTER] Popup

 

 

 

 

 

 

 

 

 

 

 

7.After selecting the hard disk drives, press <F7> to create the RAID 1 set. A pop-up window appears.

Clear disk data?

[Y] YES

[N] Cancel

8.Press <Y> to delete all data from the hard disk drives and continue creating the RAID set. Press <N> to backup exisitng data to a target hard disk drive.

You will lose all data on the drives if you clear the disk data!

9.The utility displays the created RAID 1 set. Press <Ctrl+X> to save your settings and exit the utility.0

ASUS TW510-E2

6 - 7