2.8Expansion cards

The chassis is designed with a screwless expansion slot frame on the rear panel. This design feature allows you to install or remove an expansion card in less steps.

Make sure to unplug the power cord before installing or removing expansion cards. Failure to do so may cause physical injury, and damage to the card and motheboard components!

2.8.1Installing an expansion card

To install a standard size expansion card:

1.Remove the plastic card lock opposite the slot where you wish to install the expansion card. Release the card lock by pressing the center tabs and pushing outward. Set the card lock aside for later use.

Card loc k tab

2.Remove the metal bracket opposite the slot where you wish to install the expansion card.

3.Push the expansion card connector to the slot, then make sure that it is properly seated on the slot.

ASUS TW510-E2

2 - 23