Viewing the internal structure

Without the side cover, the internal structure and installed components of the barebone server vary depending on the model you purchased. Refer to section “1.5 Internal features” for the different model configurations.

Perform the procedures in the succeeding sections to install the CPU, system memory, disk drives, and expansion cards; replace fans and power supply; and connect the system cables.

You may need to remove some of the installed components to access the DIMM sockets and internal connectors. Refer to section “2.10 Removable components” for instructions.

2.1.2Reinstalling the side cover

To reinstall the side cover:

1.Align the cover rail with the chassis rail (A), then match and insert the cover top hooks to the elongated holes on the side of the chassis (B). All the four hooks must properly fit the designated holes.

2.Slide the cover toward the front until it snaps in place.

3.Push down the chassis lock to secure the side cover.

B

A

3

2

ASUS TW510-E2

2 - 3