Back side

The back side of SATA backplane faces the rear panel when installed. This side includes the power and HDD fan connectors, jumper, SATA interfaces, and SMBus connectors.

 

 

 

 

 

 

SMBus connector (upper 6-1 pins)

 

 

 

 

 

 

Fan connector

 

(connects the SMB cable from the motherboard)

(for HDD fan)

 

Power SMBus connector (lower 6-1 pins)

 

 

 

 

 

 

Power connectors

 

(connects the SMB cable from the power supply, when available)

 

 

 

 

(connect power plugs

 

 

 

 

from the power supply)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CON2

CON4

CON6

CON8

SATA backplane jumper settings and HDD ID assignments

The 6-pin jumper J 1 allows you to define your desired SATA configuration. The picture below shows the location of jumper J1 with pins 1-3 and 2-4 shorted. Refer to the table for the jumper settings and the appropriate ID# for each SATA HDD bay.

J 1 setting

(1-3 shorted, 2-4 shorted)

D e v i c e

SAT A B P ID

 

 

Drive Bay 1

CON2

 

 

Drive Bay 2

CON4

 

 

Drive Bay 3

CON6

 

 

Drive Bay 4

CON8

ASUS TW510-E2

2 - 27