Asus TW510-E2 8-pinATX12V1), 9 . ATX power connectors (24-pinEATXPWR1

9 . ATX power connectors (24-pin EATXPWR1,8-pin ATX12V1)

These connectors are for an ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

• Do not forget to connect the 8-pin ATX +12 V power plug; otherwise, the system will not boot.

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•Make sure that your power supply unit (PSU) can provide at least the minimum power required by your system. See the table below for details.

	24-pin Power Connector
	+3	Volts	+3 Volts
	-12 Volts		+3 Volts
	Ground		Ground
	PSON#		+5 Volts
	Ground		Ground
	Ground		+5 Volts
	Ground		Ground
	-5 Volts		Power OK
	+5 Volts		+5V Standby
K8N-DL	+5 Volts		+12 Volts
	+5 Volts		+12 Volts
	Ground		+3 Volts

K8N-DL ATX Power connectors

8-pin

GND	GND	GND	GND
12V	12V	12V	12V

For Power Supply

with 20-pin

Power Connector

4 - 12 Chapter 4: Motherboard info