Asus TW510-E2 2.10.6 Chassis footpads and roller wheels

2.10.6 Chassis footpads and roller wheels

The barebone server system is shipped with four footpads attached to the bottom of the chassis for stability. You need to remove these footpads if:

•if you want to replace the footpads with the bundled roller wheels

•you wish to install the system to a rack

(Refer to “Chapter 3: Installation options” of this user guide, and to the “Rackmount Kit” user guide for instructions.)

To remove the footpads:

1.Lay the system chassis on its side.

2.Use a flat screwdriver to flip out the inside layer of a footpad.

3.Remove the footpad by rotating it counterclockwise.

4.Repeat steps 2 and 3 to remove the other three footpads.

2 - 40 Chapter 2: Hardware setup