2.10.5 Front I/O board

You need to remove the front panel assembly before you can remove the front I/O board. Refer to section “2.5.1 Removing the front panel assembly” for instructions.

To remove the front I/O board:

1.Remove the screw that secures the front I/O board bracket to the front panel.

2.Carefully pull out the bracket until you see the cables connected to the I/O board.

3.Disconnect all the cables from the I/O board.

4.Remove the screw that secures the I/O board to the bracket.

2 - 38

Chapter 2: Hardware setup