Head

Shows the number of the hard disk read/write heads.

Precomp

Displays the precompressed volumes on the hard disk, if any.

Landing Zone

Displays the drive’s maximum usable capacity as calculated by the BIOS based on the drive information that you entered.

Sector

Shows the number of sectors per track.

Transfer Mode

Shows the data transfer mode if the hard disk supports this feature. Otherwise, this item is grayed out and shows the value [None].

S.M.A.R.T Status

Shows the Smart Monitoring, Analysis, and Reporting Technology (S.M.A.R.T) status if the hard disk supports this feature. Otherwise, this item is grayed out and show the value [None].

After entering the IDE hard disk drive information, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to “Active.”

5.3.7Primary IDE Slave

When configuring a drive as Primary IDE Slave, refer to section “6.3.6 Primary IDE Master” for the menu item descriptions.

5.3.8Secondary IDE Master

When configuring a drive as Secondary IDE Master, refer to section “6.3.6 Primary IDE Master” for the menu item descriptions.

5.3.9Secondary IDE Slave

When configuring a drive as Secondary IDE Slave, refer to section “6.3.6 Primary IDE Master” for the menu item descriptions.

ASUS TW510-E2

5 - 19