To install the front I/O board:

1.Place the I/O board in the bracket, component side up. Secure the front I/O board to the bracket with a screw.

2.Position the I/O board into the bay with the component side to the left (close to the HDDs), then connect the I/O cables to the connectors on the back of the I/O board. Refer to “2.9.1 Motherboard connections” for details on cable connections.

3.Insert the I/O board into the bay until the bracket fits the front edge of the bay.

4.Secure the I/O board bracket with a screw.

ASUS TW510-E2

2 - 39