2.7Hard disk drives

2.7.1Installing a hot-swap SATA HDD

Follow these instructions to install a hot-swap SATA hard disk drive (HDD).

1.Open the front bezel to access the hot-swap drive trays.

2.Release a drive tray by pushing the spring lock to the right, then pulling the tray lever outward. The drive tray ejects slightly after you pull out the lever.

3.Firmly hold the tray lever and pull the drive tray out of the bay.

Sprin g lock

Tra y lever

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.An empty drive tray requires a metal bracket for support. Use a Phillips (cross) screwdriver to remove the bracket when you are ready to install a hard disk in the drive tray.

Meta l bracket

ASUS TW510-E2

2 - 17