2.7.2Installing an internal SATA HDD

Your package comes with specially designed hard disk drive rails if you want to install the hard disk drives internally (not hot-swap). Depending on which bay you wish to install your hard disk drive, the orientation of the drive rails vary so that the screw holes match those on the drive.

For identification purposes, the drive rails are referred to as “Rail 1” and “Rail 2” as shown below.

Rai l 1

Rai l handle Hol e 1

Hol e 2 Hol e 3

H o l e

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rai l 2

Take note of the correct orientation of the drive rails. There is only one correct way to attach the rails when installing drives on the hard disk drive cage.

Installing a SATA hard disk drive to the first hard disk drive cage

To install a SATA hard disk drive to the first hard disk drive cage:

1.Remove the front panel assembly. Refer to section 2.5.1 for instructions.

2.Use a Phillips (cross) screwdriver to attach Rail 1 to the side of the drive as shown. The rail end should be on the side of the drive connectors.

R a i l handle

Drive connectors

Hol e 1

Hol e 3

ASUS TW510-E2

2 - 19