Manuals / Brands / Computer Equipment / Server / Asus / Computer Equipment / Server

Asus TW510-E2 6.4.2Drivers menu, Audio ALC650, NVIDIA CK8-04Professional, Silicon SATARAID miniport, Broadcom NetXtreme Software, NVIDIA nForce(TM) RAID Driver

1 162

Download 162 pages, 4.13 Mb

6.4.2Drivers menu

The Drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices.

The screen display and driver options vary under different operating system versions.

NVIDIA CK8-04 Professional

Installs the driver for the NVIDIA CK8-04 chip.

Broadcom 5751 NetXtreme Gigabit Ethernet

Installs the Broadcom 5751 NetXtreme Gigabit Ethernet driver. See page 6-13 for details.

Silicon SATARAID miniport

Installs the driver for the Silicon Image SATA RAID controller.

Broadcom NetXtreme Software

Installs the Broadcom NetXtreme software application. Refer to the application help file for details.

NVIDIA nForce(TM) RAID Driver

Creates a driver disk for the NVIDIA nForce(TM) RAID controller.

Audio ALC650

Installs the drivers and utility for the onboard audio controller. See page 6-18 for details.

Silicon SATARAID miniport Utility

Installs the Silicon Image SATA RAID utility. Refer to the application help file for details.

ASUS TW510-E2

6 - 15

Contents

Page E1976 First edition May Contents Chapter 1: Product introduction Chapter 2: Hardware setup Chapter 3: Installation options Chapter 4: Motherboard info Chapter 5: BIOS information Chapter 6: Driver installation Appendix: Reference information Federal Communications Commission Statement Canadian Department of Communications Statement Electrical safety Operation safety Audience Contents Conventions Reference Product introduction 1.1System package contents Chassis Motherboard Components Cables 1.2System specifications Page 1.3Front panel features Rear panel I/O ports 1.5Internal features 1.6LED information Hardware setup 2.1.1Removing the side cover 2.1.2Reinstalling the side cover 2.2Motherboard information 2.3.1Overview 2.3.2Installing the CPU Page 2.3.3Installing the heatsink and fan Page 2.4.1Overview 2.4.2Memory Configurations 2.4.3Installing a DIMM 2.4.4Removing a DIMM 2.5.1Removing the front panel assembly 2.5.2Reinstalling the front panel assembly 2.65.25-inchdrives Page Page 2.7.1Installing a hot-swapSATA HDD Page 2.7.2Installing an internal SATA HDD Page Page Installing an HDD dummy cover 2.8.1Installing an expansion card 2.8.2Removing an expansion card 2.9.1Motherboard connections 2.9.2SATA backplane connections Back side SATA backplane jumper settings and HDD ID assignments One SATA backplane configuration (AA4) 2.10.1 Chassis fan Page 2.10.2 HDD fan Page Page 2.10.3 SATA backplane Page 2.10.4 Floppy disk drive Page 2.10.5 Front I/O board Page 2.10.6 Chassis footpads and roller wheels Page 2.10.7 Power suppy unit Page Page Installation options Removing the footpads or roller wheels Removing the top cover Attaching the rack rails Motherboard info 4.1Motherboard layout Layout contents 4.2 Jumpers 1 . Clear RTC RAM (CLRTC1) 2 . Keyboard power (3-pinKBPWR1) 3 . 1394 controller setting (3-pin1394_EN1) 4 . Gigabit LAN controller setting (3-pinLAN1_EN1) 5 . RAID controller setting (3-pinRAID_EN1) 4.3 Internal connectors 1 . Floppy disk drive connector (34-1pin FLOPPY1) 2 . IDE connectors (40-1pin PRI_IDE1, SEC_IDE1) 3 . Serial ATA connectors (7-pinSATA1, SATA2, SATA3, SATA4) Page 5 . CPU, front, and rear fan connectors (3-pinCPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2, REAR-FAN1,REAR_FAN2) 6 . Backplane SMBus connector (6-1pin BPSMB1) 7 . USB connectors (10-1pin USB56, USB78, USB910) 8 . IEEE 1394 connector (10-1pin IE1394_1) 9 . ATX power connectors (24-pinEATXPWR1 8-pinATX12V1) 10 . GAME/MIDI port connector (16-1pin GAME1) 11 . Internal audio connector (4-pinCD1) 12 . Chassis intrusion connector (4-1pin CHASSIS1) 13 . Front panel audio connector (10-1pin FP_AUDIO1) 14 . System panel connector (20-pinPANEL1) •System power LED (Green 3-pinPLED) •Hard disk drive activity (Red 2-pinHDD_LED) •System warning speaker (Orange 4-pinSPKO) •Power/Soft-offbutton (Yellow 2-pinPWRSW) Page BIOS setup 5.1.1Creating a bootable floppy disk 5.1.2Updating the BIOS File Name to Program 5.1.3Saving the current BIOS file 5.1.4ASUS CrashFree BIOS 2 utility Recovering the BIOS from a floppy disk 5.1.5ASUS EZ Flash utility 5.1.6ASUS Update utility Updating the BIOS through the Internet Updating the BIOS through a BIOS file Open Save 5.2BIOS setup program 5.2.1BIOS menu screen 5.2.2Menu bar 5.2.3Legend bar 5.2.4Menu items 5.2.5Sub-menuitems 5.2.6Configuration fields 5.2.7Pop-upwindow 5.2.8General help 5.3.1System Time [xx:xx:xx] 5.3.2System Date [Day xx/xx/xxxx] 5.3.3Legacy Diskette A [1.44M, 3.5 in.] 5.3.4Floppy 3 Mode Support [Disabled] 5.3.5Base/Extended/Total Memory [xxxxxxK] 5.3.6Primary IDE Master Access Mode [Auto] Manually detecting an IDE drive Capacity Cylinder 5.3.7Primary IDE Slave 5.3.8Secondary IDE Master 5.3.9Secondary IDE Slave 5.3.10 Third IDE Master 5.3.11 Fourth IDE Master 5.3.12 IDE Channel 4 Master 5.3.13 IDE Channel 5 Master 5.4.1CPU Configuration 5.4.2Memory Configuration Min RAS# Active Time (Tras) [ 8T] RAS# to CAS# Delay (Trcd) [ 4T] Row Precharge Time (Trp) [ 2T] Node Memory Interleaving [Disabled] S/W Memory Hole Remapping [Enabled] 5.4.3Chipset Hyper Transport Frequency [4x] Hyper Transport Width [↓16 ↑16] Errata 94 Enhanced [Auto] System BIOS Cacheable [Disabled] Spread Spectrum [Enabled] 5.4.4Onboard Device Report System Booting [Disabled] Onboard Silicon SATALink [Enabled] Onboard 1394 [Enabled] Onboard Broadcom 5751 LAN [Enabled] Onboard AC97 Audio [Enabled] Super I/O Device Parallel Port Mode 5.4.5PCIPnP IRQ Resources 5.4.6USB Configuration 5.5Power menu ACPI APIC Support [Enabled] ACPI Suspend Type [S1&S3] 5.5.1APM Configuration Restore on AC Power Loss [Power Off] Power On By PCI Devices [Disabled] WOR(RI#) From Soft-Off[Disabled] USB Wake-upFrom S1/S3 [Disabled] Power On By Alarm [Disabled] 5.5.2Hardware Monitor Voltage Monitor CPU1 DDR Voltage CPU2 DDR Voltage Chipset Voltage CPU1 Voltage Control Smart Q-FanConfiguration Smart Fan Control [Disabled] System Target Temperature [50] CPU1 Target Temperature [55] CPU2 Target Temperature [55] 5.6.1Boot Device Priority 5.6.2Hard Disk Boot Priority 5.6.3Removable Device Priority 5.6.4Boot Settings Configuration Typematic Rate Setting [Disabled] Typematic Rate (Chars/Sec) [6] Typematic Delay (Msec) [250] 5.6.5Security A note about passwords Forgot your password Password Check 5.7Exit menu Exit & Save Changes Exit & Discard Changes Load Setup Defaults Discard Changes Driver installation 6.1RAID configurations RAID 0+1 JBOD Just a Bunch of Disks 6.1.1Installing hard disks 6.1.2RAID configuration utility 6.1.3NVIDIA® RAID configurations Creating a RAID 0 set (Stripe) Define a New Array RAID Mode Striping Striping Block Page Creating a RAID 1 set (Mirror) Mirroring Rebuilding a RAID set Array List Deleting a RAID array Clearing the disk data 6.2Creating a RAID driver disk Page 6.3LAN driver installation Administrator 6.4.1Running the support CD 6.4.2Drivers menu 6.4.3Management Software 6.4.4Utilities ASUS Update ADOBE Acrobat Reader Norton Internet Security Winbond Voice Editor ASUS Screen Saver 6.5.1Realtek Audio Control Panel Sound Effect options Sound Effect S/PDIF options SPDIF Speaker Configuration Speaker Configuration Auto Test UAJ Automatic AI Audio feature Connector Sensing Bracket Option HRTF Demo HRTF Demo Play Stop General settings General Language Rear panel audio ports function variation 6.5.2ASUS POST Reporter™ Vocal POST messages Page 6.5.3Winbond Voice Editor Changing the default language Load Write Yes Customizing your POST messages Add Add Wave File Edit Event Sound Editor O K .flh Page A.1.1 General description A.1.2 Specifications A.2 Simple fixes ProblemAction The power LED on the server or on the monitor do not light up The keyboard does not work The mouse does not work The system continuously beeps after it was turned o n The message “Non-systemdisk or disk error” appears Network connection not available