Atek electronic LG10B Initial Setup, And then several seconds later the screen will display

Initial Setup

Then you would push to start entering your master passcode from the beginning.

If you enter a master passcode that is 8 to 15 digits long, the screen will display:

Enter your master passcode again and then push . If the confirming master passcode does not match, the screen will display:

And then several seconds later the screen will display:

Pushing would allow you to try to confirm the master passcode again. If you

wanted to start over with a new master passcode, you would push .

After you successfully confirm you master passcode, Logio will walk you through five more setup items. If you turn off your Logio (or it turns off automatically due to inactivity) before going through all five of these additional setup items, you will have to start the entire initial setup from the beginning next time you turn on your Logio.

5.Set up lost & found information The screen will display:

Logio User’s Manual, page 10