Changing Setup Options
And then several seconds later it will display:
Push 
if you want to skip to the next setup option (button tone volume). If you
push 
, the screen will display your current user IDs with the cursor flashing on the first character of line 1, or the title “ID1:” will flash if you do not have user ID 1
set up. After editing line 1 or leaving it as is, push 
or 
to go to line 2, and
then the same to go to line 3. When done, 
or 
. The next screen will display:
And then several seconds later it will display:
Push 
if you want to skip to the next setup option
, the screen will display your current button tone volume. Change the volume by
pushing the 
and 
buttons. Push 
when done. The next screen will display:
And then several seconds later it will display:
Logio User’s Manual, page 27
