Auto-Off Time - Semi-Permanent & Temporary Settings
If later in the same session you want to increase the number of auto-off minutes,
when you push and hold 
and push 
the screen will display the next one minute increment above what you have already added.
For example, if your normal auto-off time is set to one minute, and for this session you added one minute for a total of two minutes, and later if you want to add two more minutes to increase the total auto-off time to four minutes (one set minute and three additional minutes added for this session), first the screen will display 2 (because you already added one minute and now you are adding a second additional
minute) and then when you push 
again the screen will display 3.
So, the screen always displays the accumulated number of minutes that have been temporarily added to the normal auto-off time any time during this session. Note that it just displays the added time, not the normal (set) auto-off time. Total auto-off time for a session is the normal (set) auto-off time plus any additional minutes you have added temporarily for the current session.
Your Logio allows a maximum total auto-off time of ten minutes. So, if your normal auto-off time is set to one minute, you can temporarily add up to nine more minutes for a session. If your normal auto-off time is set to two minutes, you can temporarily add a maximum of eight more minutes, and if your normal auto-off time is set to three minutes, you can temporarily add a maximum of seven more minutes. You can add more minutes at any time during a session as long as you have not yet exceeded the maximum ten minutes allowed.
Once you add auto-off time for a particular session, the only way you can reduce the
time without turning off your Logio is by pushing the 
button and viewing (but not necessarily changing) the auto-off time setting – when you do that, the temporarily added time is cancelled.
As soon as you manually turn off your Logio, or it turns off automatically, the session is over and there is no longer any temporarily added auto-off time next time you turn it on since the added time only applies to the current session and is not a setting change.
