Atek electronic LG10B, LG10W user manual Low Battery Warning & Changing the Battery

Models: LG10W LG10B

1 60
Download 60 pages 4.27 Kb
Page 46
Image 46
Low Battery Warning & Changing the Battery

Low Battery Warning & Changing the Battery

Low Battery Warning & Changing the Battery

Battery life depends on how often you use your Logio. If it is low on battery power, when you turn it on you will see a flashing low battery icon on the right side of line 3 of the screen (master passcode entry line). When you start entering your master passcode, the icon will disappear.

When the battery is low, you will be able to continue viewing records, but in order to protect against a sudden lack of power causing data corruption due to uncompleted memory writing, you will not be able to set up new records, edit records, delete records, or change setup options until you change the battery.

There is no loss of data when you take out the battery, and all settings stay as you had them prior to changing the battery, except if you changed the contrast level, which defaults back to level three.

When viewing records when the battery is low, the contrast level may need adjusting so you can continue to read the screen easily. You will not be able to do that by using

the Manual background button, which is locked when the battery is low, but you can directly change

the contrast level by pushing and holding Manual background and then pushing Manual background or Manual background . This new setting will be saved until you change it again or until the battery totally depletes or you change the battery.

To change the battery, first turn off your Logio. Then turn it upside down, put your thumbnail into one of the two curved grooves next to the label, and gently pull out the battery tray half way. Then turn the Logio face up and gently pull the tray all the way out. You will notice the plus sign (+) is on the top. Remove the battery from the tray and replace it with a new CR2016 lithium coin cell battery oriented the same way with the plus sign (+) on top. Make sure the battery sits all the way down in the tray. Put the tray back into the Logio by angling it slightly so that one barbed corner goes in first, and then straighten out the tray and gently slide it all the way all the way in. Please recycle the old battery per applicable environmental regulations.

Logio User’s Manual, page 44

Page 46
Image 46
Atek electronic LG10B, LG10W user manual Low Battery Warning & Changing the Battery