ATI Technologies 9700 Colors on my, TV display are not, Correct, There is no display, On my TV

	Using Your ALL-IN-WONDER 41
Troubleshooting tips
Problem	Possible Solution
The colors on my	Ensure that the connections between the
TV display are not	Component Video Adapter and your HDTV are
correct	correct (Y=Green, Pb=Blue, Pr=Red). See the
	illustration on page 38.
There is no display	Your TV will not display anything until Windows
on my TV	starts; this may take several minutes.
	• Set your TV to YPbPr input.
	• Ensure that the HDTV Component Video Adapter
	is properly connected, then restart your computer.
	• Ensure that the drivers in the ATI HTDV
	Component Video Adapter Kit have been installed.
DVDs will not play	Macrovision copy-protection restricts DVD playback
in 720p or 1080i
	to 480i and 480p modes.
modes
I can’t see the	If your component input device supports it, try 720p
entire display	mode.
The display is tilted	Consult your HDTV user’s manual.
My CRT display is	Your system is in component output mode. Restart
green	your computer with the CRT monitor connected.