48 Reference
Video problems ... Problem Possible Solution
Video is
unstable or
only black and
white
Check that you are using the correct broadcast standard
format:
•For proper operation, you must specify your country in
the TV Channels Initialization Wizard.
•Check the quality of your incoming TV signal on another
receiver; bad reception may be the cause.
•Try connecting your tuner directly to the cable TV or
antenna source. Too many splitters in the cable will
degrade the signal.
There is no
video or audio
•Ensure that your cable or antenna is connected.
•In the TV Video Settings page, ensure that the video
connector is set to the correct source.
•Check that the audio and video connectors are securely
plugged into the correct jacks.
•Check that your video card is securely seated in its slot.
Please refer to the user guide for the card location.
Video
recording
stops
unexpectedly
•Video files are typically very large; ensure that you have
sufficient disk space.
•Ensure that you are recording to the correct hard disk
— click the Disk Space Settings button in the
Personal Video Recorder settings page.
•The maximum file size for the FAT 32 file system is 4
Gigabytes. You can reduce the file size by reducing the
frame size of the recording in Personal Video Recorder
settings. MPEG files are usually much smaller than AVI
files.
•Disable screen savers while recording.
•Disable Power management while recording.