Avaya G350 A

Technical specifications

G350 Media Gateway specifications

Installation of the G350 Media Gateway 55

December 2003

ATechnical specifications

This appendix provides technical specifications for the G350 and for compatible power cords.

G350 Media Gateway specifications

The table of technical specifications provides detailed information on the physical dimensions and

tolerances of the G350 Media Gateway.

Power Cord Specifications

Following are specifications for power cords suitable for use with the G350:

For North America: The cordset must be UL Listed/CSA Certified, 16 AWG, 3-conductor (3rd wire

ground), type SJT. One end is to be terminated to an IEC 60320, sheet C13 type connector rated 10A,

250V. The other end is to be terminated to either a NEMA 5-15P attachment plug for nominal 125V

applications or a NEMA 6-15P attachment plug for nominal 250V applications.

For Outside North America: The cord must be VDE Certified or Harmonized (HAR), rated 250V, 3-

conductor (3rd wire ground), 1.0 mm2 minimum conductor size. The cord is to be terminated at one end

to a VDE Certified/CE Marked IEC 60320, sheet C13 type connector rated 10A, 250V and the other end

to a 3-conductor grounding type attachment plug rated at a minimum of 10A, 250V and a configuration

specific for the region/country in which it will be used. The attachment plug must bear the safety agency

certifications mark(s) for the region/country of installation.

Table 2: G350 Media Gateway specifications

Description Value

Height 5.25 in. (133.3 mm)

Width 19 in. (482.6 mm)

Depth 15.75 in. (400 mm)

Weight of empty chassis 9-10 kg

Ambient working temperature 0-40°C

Operation altitude up to 2000 m

Front Clearance 12 in. (30 cm)

Rear Clearance 18 in. (45 cm)

Humidity 20-60% relative humidity

Contents

Main Page Page Page Contents About this book 9 1 Before you start 13 2 Installing the Avaya G350 Media Gateway 19 3 Preparing for configuration 33 4 Connecting devices 43 Page Page About this book Overview Audience Downloading this book and updates from the Web Downloading this book Safety labels and security alert labels Related resources Technical assistance Within the US International Trademarks Sending us comments 1 Installation workflows Full installation Staging Installation of a staged G350 Gathering information Unpacking 1 2 3 4 5 Site requirements Environmental Verification Power Verification Grounding Verification Required equipment Page 2 Gateway Step 1: Mount the G350 chassis Mounting the G350 in a rack Page Page Mounting the G350 on a wall Placing the G350 on a table Step 2: Install the media modules Combination limitations Allocating slots Page Inserting the S8300 Media Server module 1 2 3 4 5 Inserting media modules 1 2 3 4 5 Step 3: Attach ground conductors General grounding requirements Approved grounds Page Step 4: Connect power to the G350 Page 3 Step 1: Prepare configuration equipment Preparing a G350 without an S8300 for Page Preparing a G350 with an S8300 for Page Page Page Step 2: Assist the configuration Assisting a remote configuration Assisting an on-site configuration Assisting a combined remote and on-site Page Page 4 Step 1: Connect the network Step 2: Connect IP telephones Step 3: Connect non-IP telephones and trunks Connecting an analog telephone 1 2 Connecting a DCP telephone 1 2 Connecting an analog trunk 1 Connecting an E1/T1 trunk 1 Connecting an ISDN BRI trunk 1 Step 4: Install circuit protection Step 5: Connect to the Wide Area Network (WAN) Connecting the G350 to the WAN 1 2 Step 6: Install the Coupled Bonding Conductor Step 7: Install the Avaya Partner Contact Closure Adjunct 1 2 3 5 Step 1: Test the installation Testing telephones Testing trunks LSP failover testing Step 2: Remove the installation equipment A G350 Media Gateway specifications Power Cord Specifications Page Index A B C D H I L M N T U W