Avaya G350 manual Preparing for configuration

Contents

	• Step 2: Install the media modules	23
	Combination limitations	23
	Allocating slots	23
	Inserting the S8300 Media Server module	25
	Inserting media modules	26
	• Step 3: Attach ground conductors	27
	General grounding requirements	28
	Approved grounds	29
	Connect the safety ground	30
	• Step 4: Connect power to the G350	31
3	Preparing for configuration	33
	• Step 1: Prepare configuration equipment	33
	Preparing a G350 without an S8300 for configuration	34
	Preparing a G350 with an S8300 for configuration	36
	Connecting the USB modem	37
	• Step 2: Assist the configuration	40
	Assisting a remote configuration	40
	Assisting an on-site configuration	40
	Assisting a combined remote and on-site configuration	40
	Assisting an off-site configuration (staging)	41
4	Connecting devices	43
	• Step 1: Connect the network	43
	• Step 2: Connect IP telephones	44
	• Step 3: Connect non-IP telephones and trunks	45
	Connecting an analog telephone	45
	Connecting a DCP telephone	46
	Connecting an analog trunk	47
	Connecting an E1/T1 trunk	47
	Connecting an ISDN BRI trunk	48
	• Step 4: Install circuit protection	49
	Over-Voltage and Sneak-Current Protection	49
	• Step 5: Connect to the Wide Area Network (WAN)	50
	Connecting the G350 to the WAN	50
	Connecting an external router to the G350	51

6	Installation of the G350 Media Gateway
	December 2003