Avaya manual Preparing a G350 with an S8300 for configuration

Preparing for configuration

Step 1: Prepare configuration equipment

10Select Enable the modem and continue the installation remotely. The Connect Modem screen appears:

11Click Finish.

12Connect a serial modem to a working telephone line.

13Connect the provided DB-25 adapter to the modem.

14Disconnect the flat cable from the COM port of the laptop computer.

15Connect the flat cable to the DB-25 connector on the modem.

The G350 is now prepared for remote configuration via the modem. See Step 2: Assist the configuration on page 40) for information about how you will need to assist the supporting technician to configure the G350 from a remote location.

Preparing a G350 with an S8300 for configuration

If you installed an S8300 in the G350 and all the configuration will be done on-site, the G350 is ready for the supporting technician to set up the G350 for configuration and perform the configuration. You will need to assist the technician (see Assisting an on-site configuration on page 40).

If you installed an S8300 in the G350, and some or all of the configuration will be done remotely (see Step 2: Assist the configuration on page 40) prepare for configuration as follows:

1Connect and enable the USB modem. See Connecting the USB modem on page 37.

2If the supporting technician requires a USB CD-ROM drive to download software upgrades, connect the USB CD-ROM drive to the remaining available USB port on the S8300 module.

36	Installation of the G350 Media Gateway
	December 2003